wina niecierpliwości... wszystko było ok.Andrzej_W pisze: ↑01 mar 2024, 19:41 Kod startowy z PrusaSlicer dla CR6Kod startowy z Cura dla CR6Kod: Zaznacz cały
G90 ; use absolute coordinates M83 ; extruder relative mode M109 S{first_layer_temperature[0]-50} ; set temporary nozzle temp to prevent oozing during homing M190 S{first_layer_bed_temperature[0]} ; wait for bed temp to stabilize M140 S{first_layer_bed_temperature[0]} ; set final bed temp G28 ; home all axis G1 Z50 F240 G1 X2.0 Y10 F3000 M104 S{first_layer_temperature[0]} ; set final nozzle temp M109 S{first_layer_temperature[0]} ; wait for nozzle temp to stabilize G1 Z0.28 F240 G92 E0 G1 X2.0 Y140 E10 F1500 ; prime the nozzle G1 X2.3 Y140 F5000 G92 E0 G1 X2.3 Y10 E10 F1200 ; prime the nozzle G92 E0
Kod: Zaznacz cały
M201 X500.00 Y500.00 Z100.00 E5000.00 ;Setup machine max acceleration M203 X500.00 Y500.00 Z10.00 E50.00 ;Setup machine max feedrate M204 P500.00 R1000.00 T500.00 ;Setup Print/Retract/Travel acceleration M205 X8.00 Y8.00 Z0.40 E5.00 ;Setup Jerk M220 S100 ;Reset Feedrate M221 S100 ;Reset Flowrate G28 ;Home G92 E0 ;Reset Extruder G1 Z2.0 F3000 ;Move Z Axis up G1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position G1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line G1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little G1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line G92 E0 ;Reset Extruder G1 Z2.0 F3000 ;Move Z Axis up
poprostu gdy hotend zjeżdzał w lewy dolny róg, temperatura się zmieniała dlatego hotend tam czekał na ,,końcową" Bardzo przepraszam za zabranie czasu o taką głupotę. Można zamknąć.