reprapy.pl

Kod: Zaznacz cały

; homeall.g
; called to home all axes
;
; generated by RepRapFirmware Configuration Tool v2 on Sat Aug 03 2019 03:22:53 GMT+0100 (Brytyjski czas letni)
G91                   ; relative positioning
G1 Z5 F6000 S2        ; lift Z relative to current position
G1 S1 X205 Y205 F1800 ; move quickly to X or Y endstop and stop there (first pass)
G1 S1 X205            ; home X axis
G1 S1 Y205            ; home Y axis
G1 X-5 Y-5 F6000      ; go back a few mm
G1 S1 X205 F360       ; move slowly to X axis endstop once more (second pass)
G1 S1 Y205            ; then move slowly to Y axis endstop
G1 S1 Z-205 F1800     ; move Z down stopping at the endstop
G90                   ; absolute positioning
G92 Z0                ; set Z to axis minimum (you may want to adjust this)

; Uncomment the following lines to lift Z after probing
;G91                  ; relative positioning
;G1 S2 Z5 F100        ; lift Z relative to current position
;G90                  ; absolute positioning

; homez.g
; called to home the Z axis
;
; generated by RepRapFirmware Configuration Tool v2 on Sat Aug 03 2019 03:22:53 GMT+0100 (Brytyjski czas letni)
G91               ; relative positioning
G1 Z5 F6000 S2    ; lift Z relative to current position
G1 S1 Z-205 F1800 ; move Z down until the endstop is triggered
G92 Z0            ; set Z position to axis minimum (you may want to adjust this)

; Uncomment the following lines to lift Z after probing
;G91              ; relative positioning
;G1 S2 Z5 F100    ; lift Z relative to current position
;G90              ; absolute positioning