Sam projekt ciekawy, ale osobiście bardziej spodobał mi się inny nieco podobny projekt widziany na reddicie, też drukarki małoformatowej, mieszczącej się w pudełku po szpuli. Długo nie mogłem znaleźć rzeczonego drugiego projektu (pytałem nawet parę razy na SB), ale w końcu się udało.
Projekt drukarki nazywa się Flatpack Co wyróżnia tą drukarkę poza zgrabnie upchanymi elementami to nieruchomy stół wraz z budową wspornikową (podparta z jednej strony).
Link do projektu na github: https://github.com/eponra/flatpack (są filmiki z pracy)
Link do podglądu modelu F360: https://myhub.autodesk360.com/ue2d911ce ... e643005c91
Bardzo fajny projekt, jakbym robił kolejną drukarkę to już bym zamawiał części ...Technical Data:
folded volume of roughly 220x210x75mm (so, make sure your spoolbox has these inner dimensions at a minimum, as there are some with slightly different dimensions)
buildvolume of 120x114x114mm, so 1.6 liters
heated bed that can reach up to 110°C
Hotend capable of temperatures up to 300°C, if you choose the Copper NF Smart 500°C
powered through an external (!) powerbrick with 150W, uses 100W max
the design can theoretically use an AC bed, and consequently a small psu enabling everything to fit in one box. For safety reasons I deemed mains wiring to be to dangerous and as a result I have selected a DC powered bed to make the build more accessible to the average user.