Re: DUE3DOM LE - projekt taniej elektroniki z 6 driverami
: 02 maja 2018, 18:49
Lol kilka stopni to nie problem to spoko. Nie lepiej było dać PT lub NTC100k
PT - uważam że tak. NTC już nie bardzo, jeśli ktoś chce drukować powyżej 300C to zaczyna się problem.remus pisze:Lol kilka stopni to nie problem to spoko. Nie lepiej było dać PT lub NTC100k
w sumie to samodzielne zlutowanie płytki kompletnie zmienia optykę na "skromność" w użytych elementachFabrykator.pl pisze:Płytki dojechały. Jak ktoś ma ochotę pobawić się samemu w składanie, to może mieć za małe pieniądze przyzwoitą elektronikę sterującą.
Ja nie wiem kiedy złożę pierwszy egzemplarz, bo trochę z czasem krucho :/
Cena płytki głównej + małej do obsługi termopar - 50 zł
W sensie lutownica, czy cyna?Zepco pisze:Czym lutujesz?
Kod: Zaznacz cały
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* DUE3DOM pin assignments
*/
#ifndef __SAM3X8E__
#error "Oops! Make sure you have 'Arduino Due' selected from the 'Tools -> Boards' menu."
#endif
#define BOARD_NAME "DUE3DOM LE"
//
// Servos
//
#define SERVO0_PIN -1
#define SERVO1_PIN -1
#define SERVO2_PIN -1
#define SERVO3_PIN -1
//
// Limit Switches
//
#define X_MIN_PIN 38
#define X_MAX_PIN -1 //36
#define Y_MIN_PIN 34
#define Y_MAX_PIN -1 //32
#define Z_MIN_PIN 30
#define Z_MAX_PIN -1 //28
//
// Steppers
//
#define X_STEP_PIN 2
#define X_DIR_PIN 3
#define X_ENABLE_PIN 22
#define X_CS_PIN 13
#define Y_STEP_PIN 17
#define Y_DIR_PIN 16
#define Y_ENABLE_PIN 26
#define Y_CS_PIN 12
#define Z_STEP_PIN 61 // Z1 STP
#define Z_DIR_PIN 60 // Z1 DIR
#define Z_ENABLE_PIN 15 // Z1 ENA
#define Z_CS_PIN 10 // Z1 CS
#define E0_STEP_PIN 64 // Z2 STP
#define E0_DIR_PIN 63 // Z2 DIR
#define E0_ENABLE_PIN 62 // Z2 ENA
#define E0_CS_PIN 25 // Z2 CS
#define E1_STEP_PIN 51 // E1 STP
#define E1_DIR_PIN 53 // E1 DIR
#define E1_ENABLE_PIN 65 // E1 ENA
#define E1_CS_PIN 27 // E1 CS
#define E2_STEP_PIN 24 // E2 STP
#define E2_DIR_PIN 23 // E2 DIR
#define E2_ENABLE_PIN 49 // E2 ENA
#define E2_CS_PIN 29 // E1 CS
//
// Temperature Sensors
//
#define TEMP_0_PIN 0 // Analog Input (HOTEND0 thermistor)
#define TEMP_1_PIN 2 // Analog Input (HOTEND1 thermistor)
#define TEMP_2_PIN 5 // Analog Input (unused)
#define TEMP_BED_PIN 1 // Analog Input (BED thermistor)
// SPI for Max6675 or Max31855 Thermocouple
#if DISABLED(SDSUPPORT)
#define MAX6675_SS -1
#else
#define MAX6675_SS -1
#endif
//
// Heaters / Fans
//
#define HEATER_0_PIN 7 // HOTEND0 MOSFET
#define HEATER_1_PIN 8 // HOTEND1 MOSFET
#define HEATER_BED_PIN 39 // BED MOSFET
#ifndef FAN_PIN
#define FAN_PIN 11 // FAN1 header on board - PRINT FAN
#endif
#define FAN1_PIN 9 // FAN2 header on board - EXTRUDER0 FAN
#define FAN2_PIN 37 // FAN3 header on board - CONTROLLER FAN
//
// Misc. Functions
//
#define SDSS 4 //CS1
#define PS_ON_PIN 40
//
// LCD / Controller
//
#if ENABLED(ULTRA_LCD)
#define LCD_PINS_RS 42
#define LCD_PINS_ENABLE 43
#define LCD_PINS_D4 44
#define LCD_PINS_D5 45
#define LCD_PINS_D6 46
#define LCD_PINS_D7 47
#if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER)
#define BEEPER_PIN 41
#define BTN_EN1 50
#define BTN_EN2 52
#define BTN_ENC 48
#define SDSS 4
#define SD_DETECT_PIN 14
#elif ENABLED(RADDS_DISPLAY)
#define BEEPER_PIN 41
#define BTN_EN1 50
#define BTN_EN2 52
#define BTN_ENC 48
#define BTN_BACK 71
#undef SDSS
#define SDSS 4
#define SD_DETECT_PIN 14
#elif ENABLED(SSD1306_OLED_I2C_CONTROLLER)
#define BTN_EN1 50
#define BTN_EN2 52
#define BTN_ENC 48
#define BEEPER_PIN 41
#define LCD_SDSS 4
#define SD_DETECT_PIN 14
#elif ENABLED(SPARK_FULL_GRAPHICS)
#define LCD_PINS_D4 29
#define LCD_PINS_ENABLE 27
#define LCD_PINS_RS 25
#define BTN_EN1 35
#define BTN_EN2 33
#define BTN_ENC 37
#define BEEPER_PIN -1
#endif // SPARK_FULL_GRAPHICS
#endif // ULTRA_LCD
Kod: Zaznacz cały
#define BOARD_DUE3DOM 1411 // DUE3DOM for Arduino DUE
#define BOARD_DUE3DOM_MINI 1412 // DUE3DOM MINI for Arduino DUE
#define BOARD_RADDS 1502 // RADDS
#define BOARD_RAMPS_FD_V1 1503 // RAMPS-FD v1
#define BOARD_RAMPS_FD_V2 1504 // RAMPS-FD v2