Obico - Celestrius

Informacje o nowościach, promocjach, wyprzedażach...
Awatar użytkownika
Trolinka
Postów w temacie: 1
Posty: 562
Rejestracja: 09 sty 2020, 01:22
Lokalizacja: Kraków
Drukarka: Bambu Lab X1C Combo
x 173

Obico - Celestrius

Post autor: Trolinka »

Jak ktoś używa Obico https://www.obico.io/ w sumie może też zacząć używać to właśnie napisali że pracują nad projektem Celestrius czyli taki LIDAR od Bambu tylko taniej oparty o zwykłą kamerę. Nigdzie nie widzę informacji u nich więc zacytuję fragment emaila:
This is a special monthly newsletter edition to call for participants in the limited pilot for project Celestrius - an AI model that uses a simple nozzle camera instead of a LiDAR to tackle a slew of notorious 1st-layer issues: under/over extrusion, bed adhesion problem, wrong z-offset, you name it.

What is Celestrius?

One of the innovations by Bambu Lab's X1 is a LiDAR that watches the 1st-layer for potential print issues.

On one hand, the Obico team is excited to see a new, innovative solution promised to address the issues that cause endless headaches to even the most-experienced 3D printing enthusiasts.

On the other hand, we don't believe LiDAR is an optimal choice for this task. The reasons are:

- LiDARs are proprietary, expensive, and hard to source. This is a walled-garden solution that isn't aligned with the maker ethos deeply rooted in the 3D printing community.

- AI technologies centered around cameras are advancing at a much faster pace than those for LiDARs.

- LiDARs are for robots only. Cameras are for both robots and humans. Who doesn't enjoy watching a jaw-dropping video like this?

That's why the Obico team started project Celestrius - an AI model that will be a lot smarter than our current one simply thanks to the nitty-gritty detail a nozzle camera can reveal.

Well, this is the hope at least. In reality, we are not there yet

because this project is damn hard! After tens of failed experiments, hundreds of print hours to collect data, and thousands of cups of coffee (Ok, may not be that much coffee. But you get the point), we now need your participation to push this project over the finish line.

And this is why we have now opened a limited pilot for project Celestrius.

Limited pilot?

"Limited pilot" is our fancy jargon for "we are looking for 50-100 qualified volunteers who want to work closely with us in further developing this AI model".

Can I participate in the limited pilot?

This limited pilot program is currently only open to users who either already have a nozzle camera installed, or have one of these printer models:

- Prusa MINI/MINI+
- Voron 2.4 (ideally with a Stealthburner toolhead)
- Voron Trident (ideally with a Stealthburner toolhead)

In order to participate in the limited pilot, you also need to have basic Linux skills such as using SSH to connect to your Raspberry Pi.
Link do rejestracji podali ale widzę z ID wygenerowany per osoba, formularz już jest podpisany że mnie dotyczy.
Tak więc jako ciekawostka/info potraktować albo się gdzieś dogrzebać info/rejestracji ogólnej.
Za to linki do mocowania kamery dla Prusa MINI i Voron są ogólne:
https://obico.io/blog/prusa-mini-nozzle-camera-setup/
https://obico.io/blog/nozzle-camera-stealthburner/

PS. A samo Obico używałem (plugin do klippera) i aplikacja na telefon. Bez zabawy w tunele, VPN'y i inne wygodny monitoring.
dziobu
-------------------------------------------------
Bambu Lab X1C Combo ( Do drukowania)
Kingroon KP3S Pro S1 (Klipper & Orbiter 2.0 mod) (Do dłubania)

Wróć do „Informacje branżowe”